Linear Networks Analysis and Synthesis

Universidad Carlos III de Madrid

Course Description

  • Course Name

    Linear Networks Analysis and Synthesis

  • Host University

    Universidad Carlos III de Madrid

  • Location

    Madrid, Spain

  • Area of Study

    Systems Engineering

  • Language Level

    Taught In English

  • Prerequisites


    Linear Algebra
    Systems and Circuits
    Linear Systems
    Ampliación de matemáticas
    Electronic Components and Circuits

  • Course Level Recommendations


    ISA offers course level recommendations in an effort to facilitate the determination of course levels by credential evaluators.We advice each institution to have their own credentials evaluator make the final decision regrading course levels.

    Hours & Credits

  • ECTS Credits

  • Recommended U.S. Semester Credits
  • Recommended U.S. Quarter Units
  • Overview

    Linear networks analysis and synthesis (217 - 13841)
    Study: Bachelor in Communication System Engineering
    Semester 2/Spring Semester
    2ND Year Course/Lower Division

    Students are Expected to have completed:

    Linear Algebra (1º)
    Systems and Circuits (1º)
    Linear Systems (2º)
    Ampliación de matemáticas (2º)
    Electronic Components and Circuits (2º)

    Compentences and Skills that will be Acquired and Learning Results:

    1. Transversal/Generic learning outcomes (Be capable of...)

    - Solving mathematical analysis and synthesis problems.
    - Apply scientific and technical knowledge to practical situations.
    - Solve problems stated mathematically.
    - Integrate theoretical knowledge into the solution of problems.

    2. Specific learning cognitive outcomes (be capable of stating...)

    - Deciding and stating the advantages of using mesh or node analysis for a particular network.
    - Identifying matrices of mesh and node methods and tell whether they belong to reciprocal systems.
    - Naming and identifying the different types of system functions/transfer functions for stable causal linear networks and the relationships between responses in the Laplace, real frequency and time domains.
    - Describing part of a network as a two-port.
    - Name the different types and manifestations of power in a network with two-ports.
    - Stating the maximal power transfer theorems for generators and loads with and without an interposing two-port.
    - State the concept of conjugate matching.
    - Relating natural and logarithmic power units.
    - Stating the conditions for a network to be reciprocal and/or symmetrical
    - Describing the filter synthesis process.
    - Graphing the analog filter prescription functions in modulus and attenuation.
    - Stating the difficulties in synthesizing an ideal low-pass transfer function.
    - Stating Approximation Theory for the design of low-pass LC analog filters.
    - Mathematically describing frequency transforms for high-pass, band-pass and suppressed-band filters.
    - State the advantages of working in normalized frequency, impedance, resistance, inductance and capacitance.
    - Deferentially characterizing, with respect to the analog version, the transfer function in the Z domain of digital filters both for infinite and finite impulse responses (IIR & FIR)
    - Stating a discrete-time domain response from a difference equation.
    - Sketching direct architectures for digital filters.

    * Procedural/instrumental (e.g. Be capable of working out...)

    - Stating and solving analysis equations for linear networks with mesh and node methods both in stationary sinusoidal and in stationary and transient regimes with the unilateral Laplace transform.
    - Same with two-ports included in them.
    - Describing two-ports by their impedance, admittance, power transfer and image parameters.
    - Specifying and synthesizing passive low-, high-, bandpass and suppressed band analog filters using the Butterworth and Chebychev approximations.
    - Specifying and synthesizing said filters in the digital case resorting to analog synthesis.
    - Simulating analog filters digitally.

    Description of Contents: Course Description

    Unit 1: Systematic Linear Network analysis in stationary sinusoidal regimes with mesh and nodal analysis.

    1.1. Description of RLC components in SSR.(PO a, PO e, PO g, PO k)
    1.2. Using systematic methods for linear network analysis
    1.2.1. Mesh analysis
    1.2.2. Nodal analysis
    1.3. Networks with mutual inductance and transformers
    1.4. Real, reactive, and apparent powers. Complex conjugate matching.

    Unit 2: Linear Network analysis using the unilateral Laplace transform. (PO a, PO e, PO g, PO k)

    2.1. The unilateral Laplace transform
    2.2. The generalization of analysis theorems to the Laplace domain. Use in network analysis: free, driven, stationary and transient regimes.
    2.3. Transfer functions. Frequency response. Phase and amplitude response.

    Unit 3: Two-port network analysis PO a, PO e, PO g, PO k)

    3.1. Two-port description: [z], [y] and [F] parameters.
    3.2. Two-port interconnection.
    3.3. Image parameters.
    3.4. Loaded two-ports. Insertion and transmission losses. Matched two-ports. Conjugate matching. Logarithmic measurement units: Nepers and decibels.

    Unit 4: An introduction to the synthesis of passive, analog filters. (PO a, PO c, PO e, PO g, PO k)

    4.1. Filtering. Phase and group delay. Phase equalization. Filter types. Filter specification.
    4.2. Filter characterization functions.
    4.3. Low-pass filter approximation theory. Parameter normalization. Frequency transformations.
    4.4. Butterworth and Chebychev filter synthesis: low-pass, high-pass, band-pass and suppressed band.

    Unit 5: An introduction to the synthesis of digital filters. (PO a, PO c, PO e, PO g, PO k)

    5.1. A comparison with analog filters.
    5.2. Z domain transfer functions with infinite and finite impulse responses. Difference equations. Direct architectures. Stability.
    5.2. FIR filter synthesis from analog synthesis.
    5.3. Analog filter simulation with digital filters.

    Learning Activities and Methodology:

    Four different teaching/learning activities will be used: theoretical lectures, problem-solving sessions, problem solving assignment and formative evaluation assessment tests.

    ECTS credits include in all cases an allotment for personal work and team problem-solving work.

    Theoretical lectures will include the use of blackboard and slide material to illustrate main concepts in subject. The explanation of theoretical concepts will be complemented with exercises and problem solution sketches. These lectures will require personal initiative and research plus theoretical study: he/she might be asked to develop particular concepts or apply them to specific problem instances either individually or in group.

    For problem-solving sessions, students will be given problem statements in advance. Problem solving will include common review of solutions and instructor-led correction. These should help ground knoledge and develop the ability to analyse and transmit information relevant to problem-solving. Common review is expected to improve opinion exchange between instructors and students.

    It is intended to carry out a series of short along the test course whose content will be related to the most important concepts that have been given until the test, although focusing primarily on recent concepts explained in the theory sessions.This type of assessment is intended both to provide a continual evaluation scheme, thus it contributes to final assessment, and an evaluative scheme: the aggregate results of the assessment tests will be reviewed in class to highlight strong and weak points in the student population for that test (see below).

    It is intended to carry out two "software" laboratory in computer classroom where the student can simulate the circuits that have been analyzed or designed in the theoretical sessions. With these simulations, students can evaluate the success of the analysis and design techniques learned in class.

    Individual tutoring sessions are intended to involve specific, clearly defined aspects. Appointments will be managed through the learning management system being used during the course. If requiered, collective tutoring sessions will be held after evaluative assessment sessions to provide feedback to the group about the solution and assessment results.

    Assessment System:

    Final assessment will comprise a weighted aggregate of evaluative assessment and final evaluation test. Weights are to be found above.

    A minimum grade/score of 4.0 will be needed in the final test.

    The final evaluation test will comprise both theoretical questions and problems resembling those of the formative evaluation tests, about all the units in the subject.

    Basic Bibliography:

    Alan V Oppenheim, R. W. Schafer J. R. Buck. Discrete-time signal processing.. Prentice Hall. 1999
    Anant Agarwal. Foundations of Analog and Digital Electronic Circuits. Elsevier. 2005
    C. K. Tse. Linear circuit analysis. Addison-Wesley. 1998
    J.W. Nilsson. Electric Circuits. Prentice Hall. 2008
    R. A. DeCarlo. Linear Circuit Analysis. Oxford University Press. 2001

    Additional Bibliography:

    P. R. Adby. Ellis Horwood Series: Electrical and Electronic Engineering, Applied Circuit Theory. Matrix and Computer Methods. John Wiley & Sons. 1990
    R. Decarlo, P. M. Lin. Circuit Analysis. vol. 2 Prentice-Hall, 1995.
    A. Papoulis. Circuits and Systems: A Modern Approach. Rinehart & Winston, 1980.
    F. J. Taylor. Principles of Signal and Systems. McGraw-Hill, 1994.
    G. C. Temes, J. W. Lapatra. Introduction to Circuit Synthesis and Design. McGraw-Hill. 1977
    S. Karni. Applied Circuit Analysis. John Wiley & Sons, 1988..
    W. M. Siebert. Circuits, Signals and Systems. MIT Press, 1985.

Course Disclaimer

Courses and course hours of instruction are subject to change.

ECTS (European Credit Transfer and Accumulation System) credits are converted to semester credits/quarter units differently among U.S. universities. Students should confirm the conversion scale used at their home university when determining credit transfer.


This site uses cookies to store information on your computer. Some are essential to make our site work; others help us improve the user experience. By using the site, you consent to the placement of these cookies.

Read our Privacy Policy to learn more.